|
- Previous: X300 PCI X300 PCI Adapter
- Up: List all bus-systems
ADSL Ethernet Bridge
Supporting
all major ADSL standards, the GS-E280D ADSL Ethernet Bridge is
specifically designed to provide remarkable performance while
minimizing cost and providing an easy configuration process for
end-users. Preconfigured for bridged mode in compliance with
RFC1483/2684, the GS-E280D eliminates any complicated configuration
process. Requiring only limited installation procedures, the bridge is
ready for use after only a few simple plug-n-connect steps™. In no
time, users will be able to enjoy high-speed broadband Internet access.
|
Features ADSL
Standards:
- ANSI
T1.413 Issue 2
- ITU
992.1 (G.dmt), ITU 992.2 (G.Lite)
- ITU
G.994.1 (G.hs) automatic mode sensing
Data Rates:
- Full
Rate: Up to 8Mbps downstream/640Kbps upstream
- G.Lite:
Up to 1.5Mbps downstream/512Kbps upstream
- Automatic
rate adaptation in 32Kbps steps
ATM Standards:
- UNI
I.363.5 ATM Adaptation Layer 5 (AAL5)
- 0-255
VPI and 0-65535 VCI address range
- ATM
Forum UNI3.1/4.0 PVC ATM signaling
- Class
of Services: UBR
- ITU
I.610 OAM F4/F5 Loopback
WAN Protocols:
- LLC
Encapsulation and VC Multiplexing
- IETF
RFC1483/2684 Multiprotocols over ATM
- Supports
3rd party PPPoE/RFC2516
Bridging Protocols:
- IEEE
802.1d Transparent Bridging
- Spanning
Tree Algorithm (STA)
- Up
to 16 Learning MAC addresses
- Bridge
filter function
Network Management:
- Auto-configuration
of VPI/VCI and encapsulation parameters
- FTP
firmware upgrade
Hardware Specifications:
- LAN:
Ethernet 10/100BaseT
- WAN:
RJ-11 ADSL Line
- Power:
7.5VDC
- Dimensions
(W x L x H): 4.2" x 4.7" x 1.1" (10.7cm x 11.9cm x 2.8cm)
LED Status Indicators:
- Power:
Solid = Power to the unit
- Ethernet:
Solid = Ethernet link detected
- ADSL:
Flashing = Establishing ADSL link Solid = Established ADSL link
Power Requirements:
- Input:
120VAC, 60Hz
- Output:
7.5VDC, 1000mA, 7.5W
Certification:
System Requirements :
- Any
computer with an Ethernet 10/100 RJ-45 interface
- Any
operating system that supports an Ethernet connection with an IP stack
- ADSL
and Internet service from your local telephone company or Internet
Service Provider (ISP)
Package Contents:
- GS-E280D
ADSL Ethernet Bridge
- RJ-45
Ethernet cable
- RJ-11
ADSL Cable
- Power
adapter
- Getting
Started Guide
Specifications are subject to change without notice.
|
Information used to be available at:
http://www.greatspeed.com/products/gs-e280dspecs.htm and http://www.greatspeed.com/pdf/specs/gs-e280d.pdf
Technology: | ADSL (G.992.1) |
Linux support: | No |
Price per Modem/NIC: | US$80.99 |
web page used to be available at: http://www.greatspeed.com/products/gs-e280dspecs.htm
PDF documentation used to be available at: http://www.greatspeed.com/pdf/specs/gs-e280d.pdf
If you are the producer of this modem / NIC and want to correct/update the presented information, please feel free to register for direct database access.
|