ADSL Compliance
|
ANSI T1.413 Issue 2
G.992.1 (G.dmt)
G.992.2 (G.lite)
|
ATM protocols
|
Supports up to 8 Virtual Channel
Connections (VCCs)
Supports UBR and GFR services
AAL layer (AAL5 & SAR)
OAM F5/F4
Ethernet over ATM (RFC 1483)
IP over ATM (RFC 1577)
|
PPP support
|
PPP over AAL5 (RFC 2364)
PPP over Ethernet (PPPoE, RFC 2516)
PPP over ATM (RFC 2364)
|
Bridge Mode
|
Up to 1000 hosts
Ethernet to ADSL self learning Transparent bridging (IEEE 802.1D)
Supports bridged PDU encapsulation (RFC 2684)
Supports MAC address learning
Supports bridge filtering and forwarding function
|
Router Mode (Router only)
|
RIP 1 & 2 dynamic and static routing
DHCP (RFC 1541) / IPCP (Internet Protocol Configuration Protocol (IPCP)
RFC 1332
Network Address Translation (NAT) / Port Address Translation (PAT)
Virtual Server Mapping
DNS proxy
PAP or CHAP for user authentication
|
Quality of Service (QoS)
|
Unspecified Bit Rate (UBR), Guaranteed
Frame Rate (GFR) and CBR
|
Management
|
Supports SNMP v1 MIB and MIB II
Text-base management that can be configured locally via console
(Reserved in PS2 jack) and remotely via Telnet.
TFTP (Trivial File Transfer Protocol) and FTP for firmware upgrade,
configuration backup and restore
Web-based (HTTP) configuration
Dying Gasp
|
Security
|
Layer 2 MAC Address Filtering
IP filtering and firewall
|
LED indicators
|
PWR/WAN-LINK/WAN-DATA/LAN-LINK/LAN-DATA
|
Physical Requirement
|
Dimensions: 175 mm (Width), 145 mm
(Depth), 34 mm (Height)
Weight: TBD
|
Physical Interface
|
WAN interface: One ADSL line RJ-11 port
LAN interface: 4 RJ-45 ports for 10/100M switching Ethernet LAN
connection
Console: CLI function reserved in Ethernet port 1 for system
configuration
USB: One USB for PC connection
Reset Bottom: For system re-boot
Power Switch: For power on and off
|
Power Requirement
|
Device Input: DC 15V/1A +/- 5% with
power consumption < 10W
|