External ADSL Modem with Ethernet and ATM Interface
The ALCATEL Speed Touch Home modem is an external ADSL modem with
Ethernet and ATM 25 interface. It connects to the phone line through a standard
RJ-11 connector. It supports the current standards in Discrete Multi-tone
(DMT) ADSL line coding, ensuring widespread interoperability with service
providers' ADSL systems.
Technical Specification
Hardware Platform
LAN interfaces: 10Base-T (RJ-45) and ATMF-25 (RJ-45) (optional)
WAN interfaces: ADSL line R-J11
POTS interface: RJ-11 via optional POTS Splitter
Physical specifications:
Height: 3.5 cm (1.38 in.)
Width: 21.0 cm (8.26 in.)
Depth: 18.5 cm (7.28 in.)
Operating environment:
Temperature: 5° to 40° C (40° to 105°
F)
Humidity: 20% to 80%
Power requirements:
AC voltage: 100 to 120 VAC, 220 to 240 V AC
Frequency: 50/60 Hz
Power consumption: 7 W maximum34 x 170 x 135 mm (1.34
x 669 x 531 in.)
Temperature: 0° to 40° C (32 to 105 F)
Humidity: 10 to 90%
No external power required
Modem Software
Multiport self-learning transparent bridge per IEEE 802.1D
RFC 1483 multiprotocol encapsulation over AAL5/ATM: both LLC-SNAP
and VC-based multiplexing supported
Remote bridge ports are isolated from each other
Service monitoring through F4/F5 loopback and continuity checks
Remote/host software download capability
Can be used with Windows 95, 98, NT, Macintosh and Unix platforms
'Dialup networking' features (PPP)
RFC 2364 Point-to-Point protocol over ATM via PPPoA-to-PPTP
relaying
Multiple PPTP tunnels per end user allowing simultaneous VPN
connections between multiple hosts and destinations
Dialup networking user GUI allowing PPP session set up with
service provider
PAP, CHAP, MSCHAP authentication
Support for PPPoE
ADSL modem specifications
Up to 8 Mb/s downstream
Up to 1 Mb/s upstream
Can operate with a central splitter or splitterless (with in-line spliters)